Categories

PPPoE Server and Profile Configuration with Bandwidth Limit

IP > Pool > +

  • Name: IP Pool 5M, Address: 10.10.5.2-10.10.5.254, Apply, OK
  • Name: IP Pool 10M, Address: 10.10.10.2-10.10.110.254, Apply, OK
  • Name: IP Pool 20M, Address: 10.10.20.2-10.10.20.254, Apply, OK

PP > PPPoE

Interface > +

  • PPPoE Server Binding
  • Name: PPPoE-Interface, Apply, OK

PPPoE Server > +

  • Name: PPPoE Service1, Interface: LAN or Bridge Interface, Default Profile: default, Authentication: pap unchecked, Apply, OK

Profiles > +

  • Name: PPP-Profile-5M, Local Address: 10.10.5.1, Remote Address: IP Pool 5M. DNS: 10.10.5.1; 8.8.8.8; 8.8.4.4
  • Limit: Rate Limit (rx/tx): 5242880/5242880, Apply, OK
  • Name: PPP-Profile-10M, Local Address: 10.10.10.1, Remote Address: IP Pool 5M. DNS: 10.10.10.1; 8.8.8.8; 8.8.4.4
  • Limit: Rate Limit (rx/tx): 10485760/10485760, Apply, OK
  • Name: PPP-Profile-20M, Local Address: 10.10.20.1, Remote Address: IP Pool 5M. DNS: 10.10.20.1; 8.8.8.8; 8.8.4.4
  • Limit: Rate Limit (rx/tx): 20971520/20971520, Apply, OK

To create user manually:

Secrets > +

  • Name: 5M_USERNAME, Password: SOME_PASSWORD, Service: pppoe, Profile: PPP-Profile-5M, Apply, OK
  • Name: 10M_USERNAME, Password: SOME_PASSWORD, Service: pppoe, Profile: PPP-Profile-10M, Apply, OK
  • Name: 20M_USERNAME, Password: SOME_PASSWORD, Service: pppoe, Profile: PPP-Profile-20M, Apply, OK

To Use Radius Server:

Secrets > +

PPP Authentication&Accounting: User Radius: checked, Accounting: Checked, Use Circuit ID in NAS port ID: unchecked, Apply, OK

Leave a Reply

Your email address will not be published. Required fields are marked *